MTWION5200 Online Ion Analyzer is an industrial intelligent instrument for continuous online measurement and control of various ion concentrations in water.It can be matched with different ion-selective electrodes (ISE) to detect Na⁺, Ca²⁺, Cl⁻, F⁻, NO₃⁻, NH₄⁺ and other ions.

This analyzer supports real-time display of ion concentration and temperature, with automatic temperature compensation to ensure high accuracy.It provides RS485 MODBUS-RTU communication, 4–20mA analog output and relay control for alarm and dosing linkage.

Features high stability, simple calibration, power-off data storage and strong anti-interference.With IP65 protection, it is suitable for long-term on-line monitoring in industrial field.

Widely used in pure water, boiler water, drinking water, power plant, chemical engineering, environmental monitoring and water treatment systems.

The industrial online Ion Analyzer is a high-precision water quality monitoring device, used for continuous detection of various ion concentrations in water.Compatible with digital ISE sensors, including ammonium, fluoride, sodium, nitrate, calcium and other ions. Equipped with RS485 Modbus communication, automatic temperature compensation, data storage and limit alarm functions.

Key Advantages

Multi-ion universal analysis, flexible probe replacement
High precision & automatic temperature compensation
Standard RS485 remote transmission, easy system access
Industrial anti-corrosion and anti-interference design
Upper/lower limit alarm and automatic control
Simple calibration, low maintenance cost

Online RS485 Ion Analyzer for Water Treatment(001)

Product Features

Feature		Description
Measurement Range	ION	-2.00–16.00 pH
	TEMP	-30.0–130.0°C
Resolution	ION	0.01 ppm
	TEMP	0.1°C
Accuracy	pH	±0.01 ± 1 Digit
	ORP	±0.1% ± 1 Digit
	TEMP	±0.2°C ± 1 Digit
Temperature Compensation		NTC22K/PT1000/PT100/manual temperature compensation modes
Calibration Mode		single-point, two-point, or three-point calibration.
Operating Temperature		0–50°C
Storage Temperature		-10–70°C
Input Impedance		> 10¹² Ω
Display		LCD (240×160 or 256×128 dot matrix)
Current Output 1		Isolated 4–20 mA, max load 500 Ω
Current Output 2		Isolated 4–20 mA, max load 500 Ω
RS485 Interface		MODBUS RTU protocol
Control		Relay: 240 VAC 3A Max. Settings: Two HI/LO control points
Cleaning Settings		ON: 0–9999 sec OFF: 0–999.9 hrs
Protection Rating		IP65
Power Supply		100–240 VAC ±10%, 50/60 Hz, 5 W
Installation		Wall/Pipeline/Panel
Dimensions		144 × 144 × 115 mm (H × W × D)
Panel Cutout Size		138 × 138 mm (H × W)
Weight		0.8 kg